The AC337 allows you to add a second Camera Unit & Sensor Pad so that you can monitor two babies at the same time (in separate cribs). This could be very helpful for twins.
Before you connect your additional Sensor Pad you will need to connect the additional Camera Unit. Read this article if it's not already connected.
Here is how to connect the Sensor Pad to the second Nursery Unit:
Remove the batteries of both Sensor Pads
Select Nursery Unit 2 in the view mode
• You can switch the viewing camera by using the View Mode button on your Parent Unit. Just select the Nursery Unit 2.
1.2. Press the Menu Icon on the Parent Unit
Select the Setting function and press the menu button
Select the Pairing menu and press the menu button
Select the Sensor Pad 2 and press the menu button
The linking icon will appear on the screen.
Insert the battery into the second Sensor Pad (the additional Sensor Pad). It will automatically activate it
If the connection has been made, the Green Successful Pairing Icon will appear on the screen and the menu will show the OK Paired Icon . This process can take up to 15 seconds.
Otherwise, the Red Failed Pairing Icon will appear on the screen. You will need to try again
You can now replace the battery of your Sensor Pad 1.
A video is worth a thousand words:
Now that you have 2 Sensor Pads linked to your monitor, you'll be able to set the Sensor Pad sensitivity accordingly to the mattress.
To set-up, the functions of each Sensor Pad, make sure you have selected the relevant Nursery Unit. This information will be displayed on the blue top info bar.
- You can switch the viewing camera by using the View Mode button on your Parent Unit. Just select the preferred Nursery Unit or the split view.
Don't forget to read our article about the 4 corner test. This will help you to select the perfect level of sensitivity for your mattress.