Plug the Sensor Pad into the Nursery Unit - this must be done
Press the MENU button on the Parent Unit touch screen
- Press the Movement Icon (Sensor Pad) on the Parent Unit screen
ON = the monitor will continue to detect/look for movement whether the Sensor Pad is plugged into the Nursery Unit or not
OFF = the monitor will not try to detect movement and you can remove the Sensor Pad from the back of the Nursery Unit and store safely
Press OK in the MENU to confirm the setting
Please Note: if you do not press OK, after approx. 60 seconds (dependent on what Power Save Setting you have set it to) the screen reverts back to the video display and your settings will not have been saved. You would need to begin again.